THR-111B hospital hydraulic stretcher cart

Frame:  Galvanized steel tube and surface coated by electrostatic sprayBack board : American electrotyped board with X-ray cassette

Back section angle

0-75 °                                                 

Leg section angle

0-45°

Trendelenburg& rev

0-15°

Height adjust

0-300mm 

Back rest may X-ray function

CPR function

Hydraulic control panel with two seperate Hydraulic pump

-The bed is made of galvanized steel tube and surface coated by electrostatic spray.-The back board is made of American electrotyped board with X-ray cassette.-It is equipped with the imported double hydraulic rise-andfall system.-The bed can be raised and lowered, tilted forward and backward which is controlled by the treadle lying on two sides of the bed.-The cart surface is of separate structure and the upper part is supported by the imported large hydraulic pole to make the bed never sway.-It is the best choice for emergency room, ICU, ICU bed and emergency bed for transferring patient.

Photos

Details picture and functions showing:

handle for rise and lower the back board:

Epoxy gas spring handle located head end.

while rise and low back board,pls pull and hold the handle.

Back section upward:0-90 degree

push handls :

 would turn down and store under the bed when it's not in service.

cranks for raise and lower the foot board:

the screw crank loated at the bed ends,turn the cranks to raise and lower the foot board.

Foot board upward:0-40degree

More picture for your ref:

HYDROLIC STRETCHERS